Victron Argodiode 80-2SC 80A Battery Isolator
Product number:
8-67-009235
8-67-009235
Shipped in 1-3 days
Product number:
8-67-009235
The Victron Argo 80-2SC battery isolator (MPN ARG080202000R) allows the current distribution out of one energy source (e.g. alternator) to multiple battery circuits.
Compared to the 80-2AC this model is not equipped with current-limiting generator connection. With help of these isolators 2 or 3 separate battery circuits can be charged with only one power source. These batteries do not need to be connected which makes installation easier and reduces costs. Features:
Thanks to latest Schottky-diodes voltage loss is reduced to a minimum - 0.3V at low currents and 0.45V at nominal current.
All models out of Victron's Argo-series are equipped with a compensation-diode which slightly increases the alternator's output voltage and therefore compensates the voltage loss caused by the Schottky-diodes.
This is important because if the isolator is integrated into the cabling between battery and alternator without any compensation a voltage loss occurs that leads to incomplete charging and early battery aging. Current-limiting alternator connector
Some kinds of generators need DC-voltage on their B+-pole as energize input. On one hand there is a direct connection of battery and generator, on the other hand the isolator prevents a current reflow that keeps the generator from starting.
Arco-diodes (80-2AC or bigger) are equipped with a special alternator connector that allows an energize input when the generator is started. That ensures a smooth current flow between generator and battery.
Compared to the 80-2AC this model is not equipped with current-limiting generator connection. With help of these isolators 2 or 3 separate battery circuits can be charged with only one power source. These batteries do not need to be connected which makes installation easier and reduces costs. Features:
- latest Schottky-diodes (hot-carrier-diodes) to keep voltage-loss at a minimum.
- Argo 80-2SC provides a max. charging current of 80A and supports 2 batteries or battery banks
- alternator max. current 80A - supply battery can be used without discharging the starter battery
Thanks to latest Schottky-diodes voltage loss is reduced to a minimum - 0.3V at low currents and 0.45V at nominal current.
All models out of Victron's Argo-series are equipped with a compensation-diode which slightly increases the alternator's output voltage and therefore compensates the voltage loss caused by the Schottky-diodes.
This is important because if the isolator is integrated into the cabling between battery and alternator without any compensation a voltage loss occurs that leads to incomplete charging and early battery aging. Current-limiting alternator connector
Some kinds of generators need DC-voltage on their B+-pole as energize input. On one hand there is a direct connection of battery and generator, on the other hand the isolator prevents a current reflow that keeps the generator from starting.
Arco-diodes (80-2AC or bigger) are equipped with a special alternator connector that allows an energize input when the generator is started. That ensures a smooth current flow between generator and battery.
Delivery scope:
1x Victron ARG080202000R Argo80-2SC Isolator 80A for 2 batteries
1x Manual
Manufacturer:
Victron Energy
Product Type:
Battery charging current distributor for systems with 2 batteries
8-67-009235
Loading products