Victron Argo FET 100-2 100A Battery FET-Isolator

Product number: 8-67-009265

Shipped in 1-3 days

Product number: 8-67-009265

The Victron Argo FET-isolator 100-2 (MPN ARG100201020R) allows the supply of 2 separate battery circuits with up to 100A charging current via one power source. This source can be the alternator or a charger.

As the single battery banks are not connected it is not possible that they discharge or affect each other. The difference between isolators and FET-isolators is that FET-isolators barely generate any voltage losses and therefore are much more efficient.

Features:

max. charging current of 100A and connectors for 2 battery circuits
with 0.02V at low and 0.1V on high currents there is only a very small voltage loss which makes a compensating voltage increase unnecessary
proven Victron quality with a guarantee of 5 years

Only small voltage losses
Compared to common isolators there are only very small voltage losses with FET-isolators - only 0.02V at low and 0.1V on high currents. With Argo FET-isolators there is no voltage increase necessary. You should still keep an eye on short cable lengths and sufficient cable diameters.

Example: A current of 100A at a cable length of 10m and 50m² cable diameter has a voltage loss of 0.26V. At a cable of 5m and 10mm² a 50A-current generates a loss of 0.35V! That's why FET-isolators belong to the most efficient charging current distributors on the market.

Delivery scope:
1x Victron ARG100201020R Argo FET 100-2 FET Isolator 100A for 2 batteries