Victron Venus GX system control panel BPP900400100
Shipped in 1-3 days
The Victron Energy Venus gx system control module (mpn bpp900400100) provides intuitive operation and monitoring of all power systems based on Victron components. It is particularly suitable as the heart of an ess (Energy Storage System). In terms of functionality, the Venus gx is similar to the Color Control gx from Victron, but without a display and without a built-in modem, but much cheaper. It transmits all system data to the free vrm portal from Victron, from where you can monitor and administer your power system worldwide.
In addition to the power electronics, tank levels of up to 3 tanks can be monitored and visualized in the vrm portal. besides remote monitoring of the connected devices, remote configuration is also possible.
Remote Console on the vrm
Setup and monitoring is done via the remote console. Either via the vrm, via the built-in WiFi access point or via the local LAN/WiFi network.
Automatic genset start/stop
A highly flexible start/stop system. Use of charge, voltage, load and even more parameters. Specific settings for rest periods and optionally a monthly test run can be set.
Internet connection
The Venus gx can be connected to the Internet with an Ethernet cable and via Wi-Fi. The Venus gx does not have an internal cellular modem: there is no slot for a sim card. Use a commercially available gprs or 3 g router instead.
Tank level indicator inputs
The inputs for the tank level indicator are resistive: connect them to a resistive tank transmitter. Such tank transmitters are not offered by Victron. The ports of the tank level indicator can each be configured to work with European tank transmitters (0 - 180 ohms), or with US tank transmitters (240 - 30 ohms).
Data logging
If the system is connected to the internet, all data is sent to the vrm portal. If no internet connection is available, the Venus gx stores the data internally for up to 48 hours. By inserting a micro SD card or a usb stick, even more data can be stored. These files can be uploaded to the vrm portal or converted offline for analysis using the VictronConnect app.
further highlights
- The Venus gx can automatically update itself via the Internet when a new software version is available.
- Multiple languages: English, Czech, German, Spanish, French, Italian, Dutch, Russian, Swedish, Turkish, Chinese, Arabic.
- Use the Venus gx as a Modbus TCP gateway to all connected Victron products.
- Linux os based operating system
supported products
- Multis and quattros, including split-phase and three-phase systems. monitoring and control (on/off and current limiter). Configuration change is possible (only remotely via internet, not without internet connection).
- BlueSolar mppt solar chargers with a VE.Direct port.
- BlueSolar mppt 150/70 and the mppt 150/85 with VE.Can port. When multiple BlueSolar mppts with VE.Can are used in
Parallel connection, all information is combined in one. - devices of the bmv-700 family can be connected directly to the VE.Direct ports on the Venus gx. Use
The VE.Direct cable for this purpose. - bmv-600 family devices can be connected to the VE.Direct ports on the Venus gx. An
additional cable is required. - Lynx Ion + Shunt
- Lynx Ion BMS
- Lynx Shunt VE.Can
- Skylla-i Battery Chargers
- NMEA2000 tank sensors
- A usb gPS can be connected to the usb port. The data is sent to the vrm portal for traceability. The map on the vrm then shows the most recent position.
- Fronius PV inverter
Scope of delivery:
1x Victron bpp900400100 Venus gx system control module
1x user manual