Victron Temperature sensor for battery monitor bmv-712 Smart and bmv-702

The temperature sensor from Victron Energy (mpn ass000100000) can be used with the bmv-702, bmv-712 battery monitors and the VE.Bus Smart Dongle. The two-wire cable has a temperature sensor encapsulated in a ring lug.
The ring lug is connected to the positive terminal of the battery to be monitored, the red cable end - with the integrated fuse - is connected to terminal b1 on the measuring resistor, the black cable end is connected to terminal b2.

Notes:

Connection b2 on the measuring resistor is generally available for basic monitoring of a second battery (starter battery), for midpoint voltage monitoring or for temperature monitoring. Only one of these three options can be used, multiple use is not possible. The measured temperature can be displayed on the monitor in degrees Celsius or in degrees Fahrenheit.
The temperature measurement can also be used to adjust the available battery capacity according to the battery temperature. The available battery capacity decreases as the battery temperature decreases. Compared to the capacity of a battery at 20°c, the capacity decreases by 18% at 0°c and already by 40% at -20°c. The battery computer takes this into account in the calculation, so that at any battery temperature there is always an exact capacity display on the monitor.

Technical data

• Cable length: 3 meters
• Number of cores: 2
• Connections: Eyelet m10 on ferrules
• Integrated fine-wire fuse: 0.1a
• Weight: 0,1 kg

Scope of delivery:

1x Victron Temperature sensor for bmv-712 and bmv-702 - ass000100000

The temperature sensor from Victron Energy (mpn ass000100000) can be used with the battery monitors bmv-702, bmv-712 and the VE.Bus Smart Dongle. The two-wire cable has a temperature sensor encapsulated in a ring lug.
The ring lug is connected to the positive terminal of the battery to be monitored, the red cable end - with the integrated fuse - is connected to terminal b1 on the measuring resistor, the black cable end is connected to terminal b2.

Notes:

Connection b2 on the measuring resistor is generally available for basic monitoring of a second battery (starter battery), for midpoint voltage monitoring or for temperature monitoring. Only one of these three options can be used, multiple use is not possible. The measured temperature can be displayed on the monitor in degrees Celsius or in degrees Fahrenheit.
The temperature measurement can also be used to adjust the available battery capacity according to the battery temperature. The available battery capacity decreases as the battery temperature decreases. Compared to the capacity of a battery at 20°c, the capacity decreases by 18% at 0°c and already by 40% at -20°c. The battery computer takes this into account in the calculation, so that at any battery temperature there is always an exact capacity display on the monitor.

Technical data

• Cable length: 3 meters
• Number of cores: 2
• Connections: Eyelet m10 on ferrules
• Integrated fine-wire fuse: 0.1a
• Weight: 0,1 kg

Scope of delivery:

1x Victron Temperature sensor for bmv-712 and bmv-702 - ass000100000