You are in the B2B / dealer area.

Safe shopping with solar experts
Fast Shipping
Top choice renowned brands
Customer service:
+49 (0) 8721 91994-00

The Multiplus-II 48/3000/35-32 is a high-end device combination from Victron Energy (MPN: PMP482305012) that combines classic Multiplus components with an external current sensor and integrated anti-islanding function. This extends the PowerControl and PowerAssist functions to 50 A and expands the potential range of applications to include ESS applications. The inverter module delivers a whopping 3000 W under non-linear load, or 2400 W under linear continuous load. The 48 V battery charger is also very well proportioned with a charging capacity of 35 A and is complemented by a 32 A transfer switch that allows you to switch back and forth between the AC connections in a flash.

Key features of the Multiplus-II 48/3000/35-32

  • PowerControl and PowerAssist – increase of mains or generator power
  • Built-in anti-islanding function and connection option for external current sensor (optional)
  • Can be used as a backup device in grid-connected systems for power supply during grid failures
  • Can be used in various ESS (energy storage system) applications
  • Ideally suited for professional seafaring, yachts, vehicles, and land-based, off-grid applications
  • VE.Bus interface for parallel and three-phase operation, remote monitoring, and system integration
  • Virtually unlimited power through parallel and three-phase operation
  • Can be configured on site or remotely using VEConfigure software*

Always enough power thanks to PowerControl and PowerAssist

A maximum mains or generator current can be set on the MultiPlus-II 48/3000/35-32. The MultiPlus-II then takes into account other connected AC consumers and only uses the "leftover" current to charge the battery. This prevents the generator or mains connection from being overloaded (PowerControl function). The PowerAssist function adds a new dimension to the PowerControl principle. Load peaks often only occur for a limited period of time. In such cases, the MultiPlus-II immediately compensates for insufficient generator, shore power, or mains power with energy from the battery. If the load is reduced, i.e., if consumers are switched off, the energy that is then available again can be used to charge the batteries.

Solar power: AC power even during a power failure

The device can be used with off-grid and grid-connected PV systems as well as other alternative energy systems. It can be used with both solar charge controllers and grid-connected inverters.

Maximum flexibility thanks to two AC outputs

The main output ensures uninterrupted operation. In the event of a power failure or interruption of the shore/generator power, the MultiPlus-II takes over the supply to the connected loads. The switchover is so fast (less than 20 milliseconds) that uninterrupted operation of computers and other electronic devices is guaranteed. The second output only supplies power when AC power is available at the input of the MultiPlus-II. Loads that must not discharge the battery, such as a water heater, can be connected to this output.

Many options for system expansion

The settings can be changed in a matter of minutes using the VEConfigure software (a computer or laptop and an MK3 USB interface are required).Several monitoring and control options are available: Color Control GX, Venus GX, Octo GX, CANvu GX, laptop, computer, Bluetooth (with the optional VE.Bus Smart Dongle), battery monitor, Digital Multi control panel.

Remote configuration and monitoring

Install a Color Control GX or other GX products to connect to the internet. The operating data can be stored and viewed free of charge on our VRM (Victron Remote Management) website. If systems are connected to the internet, they can be accessed remotely and settings can be changed.

Technical features

  • 3000W power with non-linear load 2400W continuous load and 6000W peak power
  • for 48 V battery voltage, 32 A transfer switch, and 35 A battery charger
  • Output voltage: 230 VAC, frequency: 50 Hz
  • Max. efficiency is 95%, protection class IP22

Scope of delivery

1x Victron PMP482305012 Multiplus-II 48/3000/35-32A
1x operating instructions

Victron_MultiPlus-II-48-3000-230V_Dimensions.pdf Download
Victron_warranty-policy.pdf Download
Victron_ESS_Installation-Manual.pdf Download
Victron_VictronConnect-VE-Bus-Konfiguration_Handbuch.pdf Download
Victron_MultiPlus-II_CE.pdf Download
Victron_Automatic-Generator.pdf Download
Victron_MultiPlus-II_Certificate-ESS-NRS-097.pdf Download
Victron_VictronConnect-VE-Bus-Configuration_Manual.pdf Download
Victron_MultiPlus-II-3kVa-15kVa-230V_Datasheet.pdf Download
Victron_MultiPlus-II-230V_Handbuch.pdf Download
Victron_MultiPlus-II-230V_Manual.pdf Download
Victron_Garantiebedingungen.pdf Download
Victron_ESS_Installationshandbuch.pdf Download
Victron_MultiPlus-II-3kVa-15kVa-230V_Datenblatt.pdf Download
Ambient temperature: -40°C - +65°C
Category name: Device combinations
Humidity: max. 95 %, non-condensing
Manufacturer: Victron Energy
Protection type: IP22
Weight: 19 kg
ean: 8719076058359
mpn: PMP482305012

Manufactuerer Information

Victron Energy

Victron Energy B.V.
De Paal 35
1351 JG Almere
Netherlands

Mail: sales@victronenergy.com

Tel.: +31 365359700

offgridtec.com Reviews with ekomi.de
Loading products