Victron Coupling socket 16a/230v (2p/3w) for panel mounting plug
Product number:
8-67-013390
8-67-013390
5
1
Shipped in 2-5 days
Product number:
8-67-013390
The mp16-110 demountable coupler receptacle from Victron Energy (mpn shp301604000) is to be used with the mp16-10 panel mount receptacle. The cable size to be used depends on the current.
Features
- Connections: 2p + A
- Voltage: 230V
- Max. Current: 16a / 230V
- Housing: pa 6
- Connector pins / terminals: Brass, nickel plated
- Recommended cable cross section: 1.5mm² - 2.5mm²
Safety instructions and measures
- The electrical installation must be switched off during installation
- Install the shore connection according to the installation instructions
- Use cables with the appropriate cross sections
- Connections and safety precautions must be carried out according to local regulations
Installation instructions
Use the following procedure to attach the connector to the cable:
- Unscrew the connector and slide the housing onto the cable. The grommet can be cut to size in the process.
- Insulate the cable a. Make sure the cable ends are clean and not corroded. If necessary, cut back the cable until clean wire is visible. Do not solder the ends of the cables!
- Insert the cables into the correct color-coded terminal openings on the back of the inlet. Tighten the terminal screws to a torque. Make sure there is no cable insulation under a terminal.
- Tighten the strain relief.
- Slide the housing over the connector. Apply a small amount of soap to the cable, if necessary, to make the plastic protector easy to slide. Tighten the mounting screws securely.
Scope of delivery:
1x Victron Coupling socket 16a (shp301604000)
Manufacturer:
Victron Energy
Product Type:
Plug
8-67-013390
Loading products