Victron BlueSolar mppt 100/20 12/24/48v solar charge controller

The mppt 100/20 from Victron Energy (mpn scc110020170r) is part of the BlueSolar mppt family of charge controllers and offers ultra-fast power tracking that can increase the yield of your solar system.

mppt: Ultrafast Maximum Power Point Tracking

By continuously monitoring the voltage and current output of your solar (PV) modules, mppt technology ensures that all the energy available is actually being drawn from the modules and stored. The benefit of this is most noticeable when the sky is partially overcast and the light intensity is constantly changing.

Features

• Suitable for 12v/24v/48V systems
• Short circuit proof load output
• Intelligent battery management with Battery Life
• Programmable battery charging algorithm
• Day/night time control and light dimming option
• Intelligent VE.Direct data communication port for connection with additional devices such as Bluetooth Smart Dongle or gx Color Control Panel
• Integrated output short circuit / over temperature protection

remote monitoring and control

You can remotely control and monitor the extensive features of your BlueSolar mppt charger by attaching a Bluetooth dongle and pairing it with your smartphone or other device via VictronConnect. If your system is connected to the Victron remote management internet portal (vrm) via a gx device, you have full access to your mppt anytime, anywhere. Both VictronConnect and vrm are available free of charge.

Load output

Battery over-discharge can be prevented by connecting all loads to the load output. The load output disconnects the loads when the battery has been discharged to a predefined voltage value. Alternatively, an intelligent battery management algorithm can be selected: see Battery Life.
The load output is short-circuit proof. Some loads (especially inverters) are best connected directly to the battery. Inverter remote control is best connected to the load output. A special interface cable may be required, please refer to the manual.

Battery Life: Intelligent battery management

if the solar charge controller is not able to charge the battery to its full capacity within one day, the battery status will constantly alternate between "partially charged" and "end of discharge". This mode of operation (no regular full charging) damages a battery within a few weeks or months.
The Battery Life algorithm monitors the battery's state of charge and, if necessary, raises the load disconnect threshold day by day (i.e., disconnects the load earlier) until the energy gained is sufficient to charge the battery to near 100%. From this point, the load disconnection threshold is modulated so that charging to near 100% is achieved about once a week.

Technical data

• Battery voltage (automatic selection): 12v/24v/48V
• Rated charging current: 20A
• Nominal PV power 12v / 24v / 48v: 290w / 580w / 1160W
• Max. PV open circuit voltage: 100V
• Peak efficiency: 98%
• Charging algorithm: multi-stage, adaptive
• Operating temperature range: -30°C - +60°C
• Protection class: ip43 (electronic components), ip22 (connection area)
• Dimensions: 100 x 113 x 60 mm
• Weight: 0,65 kg

Scope of delivery:

1x Victron scc110020170r BlueSolar mppt 100/20 charge controller