Victron Battery Monitor BMV-712 BLACK Smart

The BMV 712 Smart from Victron Energy (MPN BAM030712200) is the latest battery computer in the BMV family. It provides accurate data on parameters such as battery voltage, current, power, ampere hours consumed, state of charge, and remaining runtime at the current discharge rate. The measurement resolution is very accurate and precise compared to similar products. In addition, it is equipped with an integrated Bluetooth module that allows you to access many functions and status reports of the battery computer via the free VictronConnect app.

Key features of the Victron BMV 712 Smart battery monitor

Integrated Bluetooth module: With its built-in Bluetooth module, the BMV Smart is already ready for the "Internet of Things." In addition to the BMV 712, most other Victron products now also have integrated Bluetooth. Networking, evaluation, and communication have never been as convenient as they are today.

Free Victron Bluetooth app: The VictronConnect app allows you to evaluate all Victron products with a VE.Direct interface. Depending on the device, numerous parameters can be read directly via your cell phone, computer, or tablet. You can display all important data on one screen, adjust settings, and update to the latest software. Data logging and data export options are also available. This means you always know the status of your system.

Easy installation: All electrical connections are made to the current shunt using the PCB connector. The shunt is connected to the monitor via a standard RJ12 telephone cable. Included in delivery: RJ12 cable (10 m) and battery cable with fuse (2 m). No additional components are required. A separate front panel for a square or round display, a safety ring for rear mounting, and screws for front mounting are also included.

Huge range of functions: Numerous battery monitoring functions and generously dimensioned electronic components on the Smart BMV circuit board allow you to gain deep insights into the life of your battery. In addition, with the help of the BMV, you can identify and rectify problems, even in larger battery banks, before damage occurs.

Additional features of the BMV 712 battery computer

• Programmable visual and audible alarm
• Programmable relay to disconnect essential loads or connect to a generator if necessary
• A 500 amp quick-connect shunt and connection kit
• Shunt capacity selectable up to 10,000 amps
• VE.Direct communication port
• Stores a wide range of historical data that can be used to evaluate usage patterns and battery condition
• Wide input voltage range: 6.5–70 V
• High current measurement resolution 10 mA (0.01A)
• Additional input for measuring voltage (of a second battery), temperature, or midpoint voltage, as well as associated alarm and relay settings

High-resolution measurement data from up to 2 batteries

• Current ± 0.01 A
• Voltage ± 0.01V
• Ampere hour ± 0.1 Ah
• State of charge (0-100%) ± 0.1%
• Remaining runtime ±1 min
• Temperature (0-50°C or 30-120°F) ± 1°C/°F
• Current measurement accuracy ±0.4%

Low power consumption

The BMV's power consumption is only 0.7 Ah per month (1 mA) at 12 V and 0.6 Ah per month (0.8 mA) at 24 V. Lithium-ion batteries in particular have virtually no capacity left when they are discharged to the point of shutdown due to low voltage. After shutdown due to low voltage, the capacity reserve of a lithium-ion battery is approximately 1 Ah per 1000 Ah battery capacity. The battery will be damaged if the remaining reserve capacity is removed from the battery. A residual current of 10 mA, for example, can damage a 200 Ah battery if the system is left in a discharged state for more than 8 days.

monitoring the center point voltage

A damaged cell or battery can destroy an entire large, expensive battery bank. When batteries are connected in series, measuring the midpoint voltage can generate a timely warning message. Please also refer to the BMV manual, section 5.2 for further information.
Victron recommends the Battery Balancer (BMS012201000) to maximize the service life of lead-acid batteries connected in series.

Scope of delivery:

1x Victron BMV Smart 712, battery monitor
1x Shunt 500 A / 50 mV
1x 10-meter 6-wire UTP cable with RJ12 connectors
1x 2-meter battery cable with fuse
1x front panel
1x Mounting hardware