Victron Battery Monitor BMV-700 9 - 90V DC

BMV 700 Battery Monitor

Precise monitoring
The main task of battery monitoring is to record the ampere hours consumed and the current battery charge status. The ampere hours are determined by integrating the current flow into and out of the battery. At constant current, the integration corresponds to the multiplication of current and time. For example, a discharge current of 10A over 2 hours results in a value of 20Ah. Victron battery monitors are equipped with powerful microprocessors programmed for specific tasks.

Battery "fuel gauge," remaining capacity indicator, and much more
The remaining battery capacity depends on the ampere hours consumed, the discharge current, the
Temperature, and the age of the battery. Complex software algorithms are required to take all these
Variables.
In addition to the basic display options such as voltage, current, and ampere-hours consumed
Ampere hours, the BMV-700 series also displays the state of charge, remaining runtime, and power consumption in
Watts.

Easy installation
All electrical connections are made to the power shunt using the PCB connector
. The shunt is connected to the monitor via a standard RJ12 telephone cable
Included in delivery: RJ 12 cable (10 m) and battery cable with fuse (2 m); no other
Components are required.
 
A separate front panel for a square or round display, a safety ring
for rear mounting, and screws for front mounting.
 
Easy programming
A quick installation menu and a detailed setup menu with scrolling assist the user in
making the various settings. Please refer to the manual for further details.

Standard functions
- Battery voltage, current, power, ampere hours consumed, and state of charge
- Remaining runtime at current discharge rate
- Programmable visual and audible alarm
- Programmable relay to switch off non-essential loads or switch on a generator if necessary
.
- A 500 amp quick-connect shunt and a connection set.
- Shunt capacity selectable up to 10,000 amps.
- VE.Direct communication port
- Stores a wide range of historical data that can be used to evaluate usage patterns and battery condition
.
- Wide input voltage range: 9.5–95 V
- High current measurement resolution 10 mA (0.01 A)
- Low power consumption 2.9 Ah per month (4 mA) at 12 V and 2.2 Ah per month (3 mA) at 24 V
no additional components are required.
- Easy installation: Separate front panels (square or round), ring for rear mounting or screws for front installation.

Resolution and accuracy(with a 500 A shunt)
Current	± 0.01 A
Voltage	± 0.01 V
Ampere hours	± 0.1 Ah
State of charge (0-100%)	± 0.1
Remaining runtime	± 1 min
Accuracy of current measurement	± 0.4
Voltage measurement accuracy	± 0.3%
Standards
Safety	EN 60335-1
Emissions / Immunity	EN 55014-1 / EN 55014-2
Automotive industry	ECE R10-4 / EN 50498
Accessories
Shunt (included)	500A/50 mV