You are in the B2B / dealer area.

Safe shopping with solar experts
Fast Shipping
Top choice renowned brands
Customer service:
+49 (0) 8721 91994-00

Similar Products

Phaesun Hybrid Charge Controller All Round 1000-24 V
The sophisticated All Round 1000_24 hybrid charge controller from Phaesun has been specially developed for off-grid 24 VDC wind/solar hybrid systems. ...

Shipped in 2-5 days

Shipped in 2-5 days

Matching Products

Offgridtec 5m 4mm² professional connection cable from solar module to solar charge controller
This 2-wire solar cable professionally connects the solar charge controller to the solar modules in a solar system. On the module side, the cable has ...

Shipped in 1-3 days

Shipped in 1-3 days

Cable set 2007 EBL for charge controller connection cable 1m
The 1 m long cable set 2007 from Votronic is suitable for easy connection of all common charge controllers to an existing Schaudt electrical block (EB...

Shipped in 1-3 days

Shipped in 1-3 days

Offgridtec battery selector switch for switching between two battery circuits, consumers, charging sources 200A
With the Offgridtec battery selector switch (MPN 012820), two batteries can be switched on and off simultaneously and controlled separately to reduce ...

Shipped in 1-3 days

Shipped in 1-3 days

The Steca PR 1010 is suitable for photovoltaic (PV) systems, for charging 12 V or 24 V batteries, for hobby and leisure use, for residential, commercial, and industrial applications, and for small businesses.

Unlike the PRS series from Steca, the PR series has a display that makes the controller easy to operate. In addition, all current operating parameters can be read on the display.

The controller is generally only suitable for the following rechargeable 12 V or 24 V
battery types and consumers:

  • Lead-acid batteries with liquid electrolyte
  • Sealed lead-acid batteries; AGM, GEL
  • 12V and 24V consumers that can be connected directly to the regulator (right-hand connection pair)

electronic functions

  • Protection against reverse polarity of connected solar modules
  • Protection against reverse polarity connected consumers at the load output
  • Protection against reverse polarity connected batteries
  • Battery charging and discharging are prevented
  • Short-circuit protection at the module input
  • Short-circuit protection at the load output
  • Protection against excessive charging current
  • No-load test during operation without battery or load
  • Reverse current protection
  • overvoltage and undervoltage protection
  • over-temperature protection
  • Deep discharge protection / overcharge protection
  • Complies with European CE standards


Displays

  • Graphic LCD display for operating parameters, error messages, self-test

Operation

  • Simple menu-guided operation
  • Programming via buttons
  • Manual load switch


Options

  • Prepayment interface
  • External temperature sensor
  • Alarm contact


Certificates

  • World Bank certificate for Nepal
  • CE compliant
  • RoHS compliant
  • Made in Germany
  • Developed in Germany
  • Manufactured under ISO 9001 and ISO 14001
Bedienungsanleitung_PR1010_3030.pdf Download
Ambient temperature: -10°C - +50°C
Category name: Solar charge controller
Charge controller type: PWM
Charging current (A): 10A
Charging voltage: liquid 13.9V (27.8 V); gel 14.1V (28.2 V)
Charging voltage in the boat: 14,4V (28,8V)
Connection terminal: 16mm² / 25mm² - AWG 6 / 4 (fine- / single wired)
Deep discharge protection: < 30 %/11,1V (22,2V)
Equalisation charge: 14,7V (29,4V)
Idle clamping modules: < 47 V
Manufacturer: Steca
Own consumption under load: 12,5 mA
Product Type: Charge controller
Protection type: IP32
Reclosing voltage: > 50% / 12,6V (25,2V)
Scope of application: indoor area
Weight: ca. 350 g
max. charging current: 10A
max. load current: 10A

Manufactuerer Information

Steca

Steca Elektronik GmbH
Mammostraße 1
87700 Memmingen
Germany

Mail: info@steca.com

Tel.: +49 833185580

offgridtec.com Reviews with ekomi.de
Loading products