SolaX X3-MIC-10.0K-G2 Grid-connected inverter 10 kW with dual MPPT & WiFi 3-phase

The SolaX X3-MIC-10.0K-G2 (MPN: 1030070011) is a powerful, three-phase PV inverter for private solar systems. With a rated power of10 kW, two MPP trackers, 32 A input current per tracker, 200% DC oversizing, and a maximum efficiency of 98.3%, it ensures maximum energy efficiency even with complex roof orientations. The integrated export control, smart load management functions, and ultra-wide MPPT voltage range make it the ideal solution for modern, future-proof PV systems. Thanks to its IP66 housing, optional AFCI support, and integrated Wi-Fi interface, the X3-MIC-G2 combines maximum safety with smart connectivity.

Your advantages with the SolaX X3-MIC G2

• Three-phase grid connection: for optimal load distribution and higher self-consumption rates
• Dual MPPT with 32 A input current per tracker: ideal for different roof orientations and high-performance module fields
• 200% DC oversizing & 110% AC overload capacity: maximum flexibility in system design
• High efficiency: up to 98.3% max. / 97.8% European
• Ultra-wide MPPT range (120–980 V): ensures energy yield even in low irradiation conditions
• Built-in global MPP scan: Wi-Fi / LAN / 4G - round-the-clock monitoring
• Intelligent load management: e.g., for heat pumps and smart wall boxes
• Integrated export control: for legally compliant feed-in limitation
• Integrated Wi-Fi module: fast cloud connection and app control
• IP66 certified: robust housing for indoor and outdoor installation
• Safe and future-proof: optionally with AFCI and type II surge protection on the AC/DC side
• Manufacturer product warranty: 5 years, information can be found here

Areas of application

• Three-phase photovoltaic systems
• Private homes with complex roof structures (e.g., east/west)
• Smart households with heat pumps, electric cars, or intelligent energy management

Maximum efficiency for your PV system

With a maximum efficiency of 98.3%, the X3-MIC-10.0K-G2 is one of the most efficient devices in its class. The European efficiency rating is 97.8% – ideal for operators who want to use every kilowatt hour. Even with fluctuating irradiation or complex module configurations, the inverter gets the most out of the system.

Powerful dual MPPT with 32 A input current

Thanks to two independently operating MPP trackers, each with 16 A input current, the X3-MIC G2 is perfect for high-performance PV fields – even for east/west or flat roof systems. The built-in global MPP scan ensures the optimum operating point setting at all times, while the low start-up voltage ensures energy yield even in low irradiation conditions. In combination with the ultra-wide MPPT voltage range of 120–980 V, the module connection remains extremely flexible and yield-optimized, even under changing conditions.

200% DC overloading & 110% AC overload capacity

The inverter supports oversizing of the DC side by up to 200%. At the same time, an AC overload output of up to 110% of the rated power is possible. This means maximum yields even in low light conditions and optimal operation during peak hours – for greater self-sufficiency and faster amortization.

Smart features & easy connectivity

Whether via Wi-Fi, LAN, or optional 4G, the X3-MIC G2 can be seamlessly integrated into the SolaX Cloud. Intelligent control allows for real-time remote monitoring, app-based setup, and comprehensive monitoring. Perfect for installers and demanding operators.

Secure, robust, and IP66-protected

The device is certified to protection class IP66, making it dustproof and protected against strong water jets – ideal for outdoor use. Safety features such as Type II surge protection (AC/DC), residual current monitoring, DC reverse polarity protection, and optional AFCI also make it suitable for the highest safety standards.

Technical data

PV input

• Max. recommended PV power: 20.0 kWp
• Max. input voltage: 1000 V
• Nominal PV input voltage: 640 V
• Operating voltage range: 100-985V
• MPPT voltage range: 120–980 V
• Number of MPP trackers: 2
• Strings per MPPT: 1
• Max. input current per MPPT: 16 A
• Max. short-circuit current per MPPT: 20 A

AC output

• Nominal output power: 10000 W
• Nominal output current: 15.2 A
• Max. apparent output power: 11000 VA
• Max. continuous output current: 16.0 A
• AC rated voltage: 3 / N / PE, 220/380 V; 3 / N / PE, 230/400 V
• AC rated frequency: 50 Hz / 60 Hz
• AC frequency range: 50 ± 5 Hz / 60 ± 5 Hz

General

• Max. efficiency: 98.3%
• European efficiency: 97.8%
• Protection class: IP66
• Dimensions: 342 × 434 × 156 mm
• Weight: 17.0 kg
• Cooling: Intelligent cooling
• Communication: RS485, DRM, optional: meter
• Night consumption: < 3 W

Scope of delivery:

1x SolaX X3-MIC-10.0K-G2 inverter (three-phase)
1x integrated WLAN unit (WiFi)
1x Wall bracket with mounting kit
1x Quick start guide & user documentation