Pylontech Force-H3 10.2kWh 204v LiFePO4 battery with bms fc1000 (e.g. for Kostal Plenticore) battery tower
Shipped in 2-5 days
The Force-H3 power storage system fromPylontech(mpn fh10050) is a high-voltage battery of the latest generation, which once again features the proven lithium iron phosphate storage technology. These batteries are characterized above all by a long service life and a high level of safety, even at high power. Thanks to their very good cycle stability and high load limit, the battery storage systems are an ideal partner for a high-performance photovoltaic system that can charge the storage system several times a day. Compared to the Force-H2 series, the Force-H3 impresses with a higher number of cycles of at least 8000 cycles, improved performance data and more efficient energy use.
A Kompatibilitätsliste for suitable inverters for Pylontech batteries with over 30 brands and companies, including Victron Energy, Growatt, Solis and many more, can be found as a download in our attachments! (Pylontech Compatibility List)
Highlights of the Force-H3 battery module
- LiFePO4 storage technology
- Designed for 8000+ charge cycles
- Flexibly expandable
- Parallel connection of up to 6 groups possible
- High charging and discharging capacity possible
- Dual active protection at bms level
- Service life over 15 years
- Plug and play
Group management
With the Pylontech Force-H3, several groups of battery modules can be connected in parallel to further increase the storage capacity. Up to 6 groups can be operated in parallel, allowing a maximum total capacity of 215.04 kWh to be achieved. Each group can be configured independently, which allows a high degree of flexibility when scaling the storage system. Despite the parallel grouping, the system is easy to control thanks to the central battery management system, ensuring that all modules work efficiently and safely.
Optimum coverage of self-consumption
In residential buildings, the energy demand is higher in the morning and evening, while the solar energy generated only reaches its maximum value at midday. The battery storage systems in the Force series from Pylontech compensate for this difference between consumption and generation of electrical energy. Even a small battery storage system with a capacity of up to 15 kWh can noticeably optimize self-consumption in a multi-person household and counteract the constantly rising cost of electricity. Larger storage systems enable a longer service life by specifically reducing the depth of discharge or increase the reserves in the event of a cloudy day or power outage.
Technical data (single battery module)
- Battery type: Lithium iron phosphate (LiFePO4)
- Nominal voltage: 102.4v DC
- Storage capacity: 5.12kWh
- Weight: 39kg
- Dimensions: 540 x 350 x 170mm
- Operating temperature range: -10°C - + 55°C
- Storage temperature range: -20°C - + 60°C
- Protection class: IP55
- Communication: can, Modbus
Force-H3 bms control unit
The Pylontech Force-H3 control unit (mpn fc1000) is the central battery management system for the Force-H3 high-voltage batteries, which reliably protects each battery module from unfavorable operating conditions and ensures safe, uninterrupted operation. The intuitive control panel with LED displays allows the status of the memory to be checked at any time and the communication speed (baud rate) to be adjusted.
The Force-H3 bms protects against:
- Deep discharge and overcharging
- overvoltage during charging
- excessive currents during charging and discharging
- over- and undertemperature
- Short circuit and reverse polarity
Technical data
- Operating voltage range: 172.8 - 921.6 VDC
- Charging/discharging current: 55A
- Dimensions: 540 x 350 x 150 mm
- Weight: 12kg
Scope of delivery:
2-7x Pylontech Force-H3 5.12kWh 102v high-voltage battery (depending on selection)
1x Pylontech Force-H3 fc1000 control unit
Tower base (540 x 350 x 40 mm)
2x communication cable RJ45
2x 3m power cable
1x 1m earthing cable
Mounting accessories
Manufactuerer Information
Pylontech
Pylon Technologies DE GmbH
Gerhard-Kindler-Straße 8
72770 Reutlingen
Germany
Mail: service@pylontech.de