Offgridtec measuring device TDS & EC conductivity meter Drinking water & aquarium water tester

With the multifunctional measuring device from Offgridtec (MPN: 020570), you can perform precise and reliable water tests. It displays 4 different values, which you can view and evaluate using the "Mode/Cal" button. This allows you to check your drinking water, your aquarium, or even water for industrial purposes, such as cleaning solar panelsthe LED display provides you with all the information at a glance and can be read at your leisure using the hold function. The device comes pre-calibrated, but can be readjusted at any time using an integrated screw on the back.

Product information

• Pre-calibrated at the factory
• LED display
• Practical HOLD function
• 4 different modes
• Automatic switch-off function
• Automatic temperature compensation
• Measures 0-9990 µS/CM , and ppm
• Easy to use
• Does not measure pH, chlorine, or water hardness

Display modes

TDS PPM (Total Dissolved Solids in Parts Per Million): This value indicates the total concentration of dissolved substances in the water in parts per million. It is the sum of all mineral and organic substances dissolved in a liquid. A value that is too high may indicate that the water contains many impurities. For your drinking water, TDS values below 600 ppm are acceptable; anything above that can affect the quality and taste. For industrial use, values above 500 ppm are considered potentially problematic.
EC μS/CM (Electric Conductivity in Microsiemens per centimeter): The EC value measures the electrical conductivity of the water. It is directly proportional to the concentration of ions dissolved in the water. The higher the EC value, the more ions are present, which indicates a higher level of contamination. In the industrial sector, this can lead to the spread of deposits or corrosion on technical equipment or solar modules. Your drinking water should be between 50 and 500 µS/cm . In industry, values above 1000 µS/cm are considered the limit.
°F and °C: You can measure the temperature of the water in two different units. One is Celsius and the other is Fahrenheit.

Practical functions

• The hold function allows you to easily record the measurement results and read them at your leisure. The illuminated display ensures that you can see the values clearly even in the dark or in strong sunlight.
• The automatic shut-off function turns the device off after 5 minutes without button operation. This saves power and extends battery life.
• Automatic temperature compensation in measurement mode ensures that the readings remain accurate regardless of temperature fluctuations.

Technical data

• Conductivity: 0-9999 µS/CM
• TDS: 0-9999 ppm
• Accuracy: +-2%
• Temperature range: 0.1°C - +80°C (32°F- +176°F)
• Weight: 55 g
• Dimensions: 154 x 30 x 14mm

Scope of delivery:

1x Offgridtec measuring device TDS EC conductivity meter Drinking water & aquarium