my-PV screw-in heater 3kW heating element without thermostat

With the 3kW screw-in heating element without thermostat from my-PV (MPN: 20-0550), you can use your PV power profitably and generate your hot water with the AC-THOR, AC-THOR 9s and SOL-THOR power managers. They control the heating elements steplessly and simultaneously adjust the output precisely to the available solar energy surplus. The cartridge heaters are ideal for installation in fresh water and buffer storage tanks and offer an exceptionally long service life thanks to their special design. They are also equipped with an integrated safety temperature limiter. The temperature sensors are required for applications where higher temperatures are required, such as over 90 °C in the buffer tank.

about the screw-in heater

• Hot water generation using solar power
• Heating output from 0-3000W
• With manually adjustable target temperature
• 1.5 inch standard thread
• Heating support
• 1-phase
• 2-year manufacturer's warranty (excluding calcification)

Infinitely variable with the AC-THOR & AC-THOR 9s

You can easily set your desired hot water temperature using the rotary knob. The two Power Managers automatically detect when the temperature has been reached and automatically switch to standby mode.

Self-sufficient PV heat - steplessly controlled by SOL-THOR

The 3kW screw-in heater is also compatible with the SOL-THOR. You can set the desired temperature directly using a rotary knob. This heating element is intended for higher temperatures and does not have a thermostat, but still has a safety temperature limiter. In such cases, the temperature sensor supplied with the water heater must be used to stop the heating process. Important: You can remove the safety plug from the 3kW heater without invalidating the warranty as the Power Manager does not require direct wiring.

Technical data

• Max. Power: 3000W
• Heating output: 0-3000W when controlled by AC-THOR, AC-THOR 9s or SOL-THOR
• Mains connection: 1-phase, safety plug, 230V
• Frequency range: 50Hz
• Tightening torque: 60Nm
• Connection cable: 2.8m
• Cartridge heater connection: G1 1/2 inch
• Heat-free zone: 130 mm from sealing surface
• Safety temperature limiter: Approx. 96°C - 105°C
• Target temperature range: According to the setting on the AC-THOR, AC-THOR 9s or SOL-THOR
• Operating temperature range: Ambient temperature at the housing must not exceed 35°C
• Protection class: IP45
• Weight: 1.65 kg
• Dimensions: 88 x 88 x 518 mm

Scope of delivery

1x my-PV screw-in heater 3kW without thermostat