Offgridtec mTriple motorhome solar system with 1 x 180W 45/30/350 VBCS triple charger and 5748 VPC Jupiter combi panel

The mTriple L solar systems offer the ideal power supply for your motorhome or camper. The combination of the VBCS Triple from Votronic and the OLP solar module from Offgridtec provides a reliable power supply and optimal yields. Three different options ensure a continuous supply. Charging from the mains when stationary, charging with the help of the charge booster while driving, and the combination of solar module and MPPT charge controller when the sun is shining

The compact combination of the VBCS and the highly efficient solar module is ideal when installation space is limited. The system is not only suitable for self-sufficient stationary use, but with its framed solar panel it is also ideal for use on expedition vehicles.

Features of the mTriple L:

• Average daily yield of 720Wh or 1440Wh (March–October)
• Continuous power supply with 3 charging options
• Device combination of mains charger, charging booster, and solar controller
• Suitable for all common battery types (lead-acid, AGM, GEL, lithium)
• Resistant framed solar module – ideal for installation in motorhomes and campers
• With LCD display for monitoring system parameters
• Includes mounting hardware and cable package
• All components perfectly matched
• Quick and easy installation according to the plug & play principle

The mTriple L solar system includes:

• Offgridtec OLP 180W V2 solar panel 23.4V PERC shingle technology (1x or 2x depending on selection)
• 1x Votronic 3244 VBCS 45/30/350 Triple-CI device combination
• 1x Votronic 1247 Charge Control S display
• or 1x Votronic 5748 VPC Jupiter 200 combination panel
• 1x Offgridtec solar module spoiler black 68cm bracket - Heavy Duty
• 1x Offgridtec roof feed-through, single, for cable diameters 13 mm-18 mm, black
• 1x Dekalin Dekasyl MS-5 adhesive set, black
• 1x 8m Offgridtec connection cable from solar module to charge controller
• 1x 1.5 m 10 mm² Offgridtec battery cable with MIDI fuse holder - screw terminal connection to M8
• 1x 2.5 m 10 mm² Offgridtec battery cable with MIDI fuse holder – screw terminal connection on M8
• 1x Offgridtec 60A 58V MIDI fuse & 1x Offgridtec 80A 58V MIDI fuse
• additionally for 2 modules:1x Offgridtec branch sockets & 1x Dekalin adhesive MS-5 black

The electronic core – the Votronic VBCS Triple device combination

The VBCS Triple ensures your continuous power supply in three ways. With the 30A Pb mains charger, you can efficiently charge your battery from the mains while stationary. The 45A VCC charging converter allows you to charge the on-board battery while driving. The third option is charging with solar energy using the MPP solar controller for max. 350Wp. The included temperature sensor ensures optimal charging of your batteries.

• Pb mains charger:Powerful charging of the on-board battery and supply of 12V consumers from the mains. Full charging power in the universal range of 110V/AC-230V/AC without switching is available worldwide, even with large deviations in the mains supply (undervoltage/overvoltage, sine wave, frequency). Thanks to the long-term charging characteristics, the device can be permanently connected to the mains (use, winter break)
• VCC charging converter:The powerful charging booster enables the on-board battery to be fully charged while driving. It increases/decreases the voltage to the required level so that the on-board battery can be charged with the optimum charging characteristic. It completely compensates for line losses and strong voltage fluctuations in the alternator, as is often the case with Euro 6 vehicles. The 12V consumers supplied are protected against overvoltage and voltage fluctuations.
• MPP solar controller:The MPP charge controller ensures a 10-30% increase in charging current, shorter charging times, and the best possible utilization of your solar system's power. The MPP technology automatically determines the maximum power output of the connected solar modules several times per second.

The complete system also includes either the Charge Control S display or the VPC Jupiter 200 combi panel from Votronic. Both displays allow the current output of the solar system to be reliably displayed, monitored, and controlled. The Jupiter panel also offers the options of a battery computer and water management.

Highly efficient solar power supply – the Offgridtec OLP 180W V2 solar panel 23.4V shingle technology PERC

The Offgridtec OLP 180W V2 (MPN 3-01-018485) is specially designed for 12V systems and offers optimized performance in a compact design. With its overlapping wafer design and advanced PERC technology, it ensures outstanding performance and is ideal for various applications that require a powerful energy source.

• Generator power: 180 Wp
• Module voltage (Vmp): 23.4 V
• Max. current (Imp): 7.70 A
• Open-circuit voltage (Voc): 27.61 V
• Short-circuit current (Isc): 8.16 A
• Max. system voltage: 1000 V DC
• Cell type: Monocrystalline PERC
• Power tolerance: +/- 3%
• Operating temperature: -40 to +85°C
• Cells per module: 3 x 41
• Cell size: 210 x 33.7mm
• Accessories: XC802 + 0.9 m cable + MC4
• Dimensions: 670 x 1435 x 35 mm
• Weight: 10.42 kg

Optimal cabling – Manufactured by Offgridtec Kabelmanufaktur

The mTriple solar system is delivered according to the plug & play principle with all the connection cables required to commission the system. The cables are all manufactured in our in-house cable factory and offer optimal connection quality. The 8 m long connection cable from the module to the charge controller allows for flexible installation, depending on the conditions on site. The battery cables have an integrated MIDI fuse holder to protect the charge controller and the technology behind it in the event of a short circuit or overcurrent. The fuses suitable for the system are also included.

Mounting hardware included

The complete system is supplied with all the mounting materials required for attachment to your vehicle. The Dekalin adhesive set, for bonding the solar modules to the vehicle roof, contains white adhesive, cleaning wipes, a wool wiper, and the Dekavator bonding agent. The Offgridtec roof feed-through creates the connection between the solar module on the roof and the charge controller inside the vehicle. The version with two solar modules also includes a pair of branch sockets for connecting the two modules in parallel.

Individual adjustments

As with all our complete systems, individual customizations are also possible here. Please contact us! Any costs incurred can be requested from customer service.